612 A ShenHui Building XIXIAN Road Baoan District Shenzhen 518000 Guangdong China
WKT's Insulated Jacket Safety Valve is a high-performance safety valve designed for high-temperature and high-pressure steam environments. Based on the traditional spring-type safety valve, it has been innovatively designed with an insulation sleeve, which can effectively maintain the temperature of the medium and prevent changes in medium performance due to temperature drops. This safety valve is widely used in various chemical, petroleum and pharmaceutical industries, and is an important accessory for ensuring the safety of equipment and personnel.
Main material | Sealing surface material | Temperature range | Pressure range | Caliber range | Applicable standards | Connection standard | Driving mode | Applicable medium |
WCB\CF8\CF8M | PTFE\13Cr\STL | -29~425℃ | PN6~420 Clsaa150~2500 | DN25~600 NPS1~24 | GB/T12241 GB/T12221 ASME B16.10 | ASME B16.5 GB/T9113 ASME B16.25 GB/T12224 | automatic | Water, steam, oil, etc |
The main function of the Insulated Jacket Safety Valve is to provide safe pressure relief protection. When the internal pressure of the system exceeds the set value, the device will automatically open and release excess pressure, thereby preventing equipment damage or safety accidents. Its advantages lie not only in its excellent insulation performance, but also in the following aspects:
1. High safety: It can effectively prevent the threat of overpressure and ensure the timely opening of the safety valve at critical moments.
2. High temperature resistant materials:High-quality materials are strictly selected to adapt to various media and high temperature environments.
3. Anti-corrosion design: The built-in bellows structure protects the spring and other key components from medium erosion and prolongs the service life.
4. Easy to install and maintain: The valve has clear markings and a convenient installation mechanism, which reduces the complexity of installation.
1. Efficient insulation design: The inlet flange and valve body are insulated to ensure continuous maintenance of the medium temperature and optimize the process flow.
2. Bellows balance structure: This structure can offset the back pressure in the system, ensure the stability of the opening pressure of the safety valve, and achieve higher safety and reliability.
3. Strong adaptability: The material can be customized according to different media, temperature and other environments to ensure the perfect match between the valve performance and the installation environment.
4. Vertical installation and barrier-free flow: The design requires that the safety valve should be installed vertically and there should be no resistance at the outlet to avoid pressure accumulation and ensure efficient response of the valve.
The insulation jacket safety valve is suitable for a variety of industries and occasions, especially in environments with strict requirements on the medium temperature:
1. Petroleum and chemical industry: Such as polyester, ethylene, heavy oil and other equipment.
2. Pharmaceutical industry: Highlight requirements on efficacy and quality control to avoid temperature changes affecting ingredients.
3. Food processing: Ensure temperature compliance during processing and maintain food safety.
4. Urea fertilizer production: Ensure safety in high-temperature chemical synthesis.
1. Pre-installation preparation: Before installing the insulation jacket safety valve, check the integrity and sealing of each valve component.
2. Vertical installation: Ensure that the safety valve is installed vertically as required and follow relevant engineering specifications.
3. Connect pipeline: Ensure that the valve is tightly connected to the corresponding pipeline to maintain an unobstructed flow channel.
4. Perform testing: After installation, pressure test the safety valve to ensure that its opening pressure meets the specified requirements and there is no leakage.
5. Regular inspection: During use, regularly check the working status and sealing performance of the valve and perform maintenance in time.
1. Is the insulation jacket safety valve suitable for all working conditions?
- No, the selection of a suitable safety valve needs to be configured according to the specific medium, temperature and pressure to ensure optimal performance.
2. How to determine whether the safety valve is working properly?
- Perform pressure tests and sealing checks regularly to ensure that the safety valve can be opened flexibly under the specified pressure.
3. What should be done if a leak occurs during use?
- Immediately stop the equipment, check the leaking part, and replace the seal or repair the valve body according to the specific situation.
4. What effect does the insulation jacket structure have on the performance of the safety valve?
- The insulation jacket can effectively maintain the temperature of the medium in the valve, prevent the valve from being affected by temperature changes, and thus ensure the safety of the equipment.
Since its launch, WKT's insulation jacket safety valve has been widely praised by users. Many customers said that the insulation effect of the product is very significant, which can effectively improve the response time and stability of the safety valve and greatly reduce production risks. At the same time, the correct installation and regular inspection of the product have also been recognized by users, and everyone generally believes that this is an important guarantee for improving corporate safety management. A person in charge of a large chemical company said: "After using WKT's insulation jacket safety valve, the safety of our equipment has been significantly improved, and the production efficiency has also increased accordingly. We are very satisfied."
---
WKT's insulation jacket safety valve, with its superior design and powerful functions, provides a solid guarantee for safety in high temperature and high pressure working conditions. Choose WKT and choose peace of mind.
WKT's Insulated Jacket Safety Valve is a high-performance safety valve designed for high-temperature and high-pressure steam environments. Based on the traditional spring-type safety valve, it has been innovatively designed with an insulation sleeve, which can effectively maintain the temperature of the medium and prevent changes in medium performance due to temperature drops. This safety valve is widely used in various chemical, petroleum and pharmaceutical industries, and is an important accessory for ensuring the safety of equipment and personnel.
Main material | Sealing surface material | Temperature range | Pressure range | Caliber range | Applicable standards | Connection standard | Driving mode | Applicable medium |
WCB\CF8\CF8M | PTFE\13Cr\STL | -29~425℃ | PN6~420 Clsaa150~2500 | DN25~600 NPS1~24 | GB/T12241 GB/T12221 ASME B16.10 | ASME B16.5 GB/T9113 ASME B16.25 GB/T12224 | automatic | Water, steam, oil, etc |
The main function of the Insulated Jacket Safety Valve is to provide safe pressure relief protection. When the internal pressure of the system exceeds the set value, the device will automatically open and release excess pressure, thereby preventing equipment damage or safety accidents. Its advantages lie not only in its excellent insulation performance, but also in the following aspects:
1. High safety: It can effectively prevent the threat of overpressure and ensure the timely opening of the safety valve at critical moments.
2. High temperature resistant materials:High-quality materials are strictly selected to adapt to various media and high temperature environments.
3. Anti-corrosion design: The built-in bellows structure protects the spring and other key components from medium erosion and prolongs the service life.
4. Easy to install and maintain: The valve has clear markings and a convenient installation mechanism, which reduces the complexity of installation.
1. Efficient insulation design: The inlet flange and valve body are insulated to ensure continuous maintenance of the medium temperature and optimize the process flow.
2. Bellows balance structure: This structure can offset the back pressure in the system, ensure the stability of the opening pressure of the safety valve, and achieve higher safety and reliability.
3. Strong adaptability: The material can be customized according to different media, temperature and other environments to ensure the perfect match between the valve performance and the installation environment.
4. Vertical installation and barrier-free flow: The design requires that the safety valve should be installed vertically and there should be no resistance at the outlet to avoid pressure accumulation and ensure efficient response of the valve.
The insulation jacket safety valve is suitable for a variety of industries and occasions, especially in environments with strict requirements on the medium temperature:
1. Petroleum and chemical industry: Such as polyester, ethylene, heavy oil and other equipment.
2. Pharmaceutical industry: Highlight requirements on efficacy and quality control to avoid temperature changes affecting ingredients.
3. Food processing: Ensure temperature compliance during processing and maintain food safety.
4. Urea fertilizer production: Ensure safety in high-temperature chemical synthesis.
1. Pre-installation preparation: Before installing the insulation jacket safety valve, check the integrity and sealing of each valve component.
2. Vertical installation: Ensure that the safety valve is installed vertically as required and follow relevant engineering specifications.
3. Connect pipeline: Ensure that the valve is tightly connected to the corresponding pipeline to maintain an unobstructed flow channel.
4. Perform testing: After installation, pressure test the safety valve to ensure that its opening pressure meets the specified requirements and there is no leakage.
5. Regular inspection: During use, regularly check the working status and sealing performance of the valve and perform maintenance in time.
1. Is the insulation jacket safety valve suitable for all working conditions?
- No, the selection of a suitable safety valve needs to be configured according to the specific medium, temperature and pressure to ensure optimal performance.
2. How to determine whether the safety valve is working properly?
- Perform pressure tests and sealing checks regularly to ensure that the safety valve can be opened flexibly under the specified pressure.
3. What should be done if a leak occurs during use?
- Immediately stop the equipment, check the leaking part, and replace the seal or repair the valve body according to the specific situation.
4. What effect does the insulation jacket structure have on the performance of the safety valve?
- The insulation jacket can effectively maintain the temperature of the medium in the valve, prevent the valve from being affected by temperature changes, and thus ensure the safety of the equipment.
Since its launch, WKT's insulation jacket safety valve has been widely praised by users. Many customers said that the insulation effect of the product is very significant, which can effectively improve the response time and stability of the safety valve and greatly reduce production risks. At the same time, the correct installation and regular inspection of the product have also been recognized by users, and everyone generally believes that this is an important guarantee for improving corporate safety management. A person in charge of a large chemical company said: "After using WKT's insulation jacket safety valve, the safety of our equipment has been significantly improved, and the production efficiency has also increased accordingly. We are very satisfied."
---
WKT's insulation jacket safety valve, with its superior design and powerful functions, provides a solid guarantee for safety in high temperature and high pressure working conditions. Choose WKT and choose peace of mind.
